A garment fails
at its seams.
Fabric gets the attention and construction decides the outcome. These are the joins, finishes and reinforcements available, and the situation each one is actually for.
How panels are joined.
Overlock
The standard join. Fast, strong and slightly raised on the inside, which is fine anywhere the seam does not sit against moving skin.
Flatlock
Panels butted rather than overlapped, so the seam lies flat on both faces. Used wherever a raised seam would chafe over distance or under compression.
Coverstitch
Two or more needles over a folded edge. Hems and necklines that need to stretch without popping.
Bar tack
Concentrated reinforcement at a stress point: pocket corners, fly ends, crotch gussets and anywhere a grip or a pull concentrates.
Bonded and taped
Seams joined with adhesive film rather than thread, then taped. No stitch holes, no chafe line, and the cleanest option on a race fit piece.
Double and triple stitched
Two or three parallel rows for impact seams. Standard on riding gear, where a single row is not a serious answer.
Everything after the join.
Gussets
A diamond or triangular panel at the crotch that removes the four seam junction. More range of movement and one less failure point.
Elastic and drawcords
Enclosed elastic, exposed elastic, internal drawcord, external cord with tipped ends. Chosen for the sport, not for the cost.
Waistbands
Wide supportive bands, folded casings, brushed inner faces and hidden pockets, graded so they sit correctly rather than roll.
Zips and closures
Full length, half zip, quarter zip, invisible, water resistant, and hook and loop where a zip would fail. Chin guards where a zip reaches the neck.
Cuffs and hems
Ribbed, bound, raw edge, elasticated or silicone gripped. The gripper is what stops a jersey hem riding up in a race position.
Linings and mesh
Brief liners, mesh side panels, part linings and pocket bags, in whichever weight the outer fabric will allow.
Tell us the failure, not the fix.
The most useful thing a buyer can send is where the last batch went wrong. A hem that rolled, a crotch that split, a print that cracked at the shoulder. That tells us more than a specification does.
If you do not know which construction you need, describe the sport and the complaint. Picking the join is our job, not yours.
Branding methods
Spec it properly and the sample comes back right.
Tell us the seams, closures and finishes the garment needs and we will quote it built that way rather than to a default.